| |
1. |
Amerongen, J. van, Klugt P. van der, & Nauta Lemke H. van, 1990. Rudder roll stabilization for ships, Automatica 26 (4), pp.679-690.
|
2. |
Alarçin, F., & Gulez, K., 2007. Rudder roll stabilization for fishing vessel using neural network approach. Ocean Engineering. 34(13), pp.1811-1817.
|
3. |
Alujević, N., Ćatipovića, I., Malenicab, Š., Senjanovića, I., Vladimira, N., 2019, Ship roll control and power absorption using a U-tube anti-roll tank, Ocean Engineering, 172, pp.857-870.
|
4. |
Burger, W., Corbet, A., 1966. Ship Stabilizers: A Hand Book for Merchant Navy Officers, Pergamon. |
5. |
Chung, T. Y., et al., 2010, A study on conceptual design of anti-rolling devices for 250 TEU class mobile harbors. The Korean Society of Noise and Vibration Engineering, 20(7), pp.629~636.
|
6. |
InvenSense Inc, 2014. MPU-9250 Product Specification, InvenSense Inc. |
7. |
Jeong, M.J., 2019. Simulation modeling and performance verification of motion characteristics for USSV's SILS. Master's Thesis. Kyungnam University. |
8. |
Kim, J.H. & Kim, S.Y., 2015. Development trends and industry status of unmanned ship technology. Korea Evaluation Institute of Industrial Technology, 15(3), pp.83-95. |
9. |
Kim, N.W., Kim, Y.J. & Ha, Y.R., 2015. Experimental study of the free roll decay test for the evaluation of roll damping coefficients. Journal of the Society of Naval Architects of Korea, 52(6), pp.460-470.
|
10. |
Lee, K., Jeong, M.J. & Kim, D.H., 2017. Software-In-the-loop based modeling and simulation of unmanned semi-submersible vehicle for performance verification of autonomous navigation, IOP Conference Series: Materials Science and Engineering, 280, 012042.
|
11. |
Lihua, L., Peng, Z., Songtao, Z., & Jia, Y., 2019, Simulation analysis of fin stabilizers on turning circle control during ship turns, Ocean Engineering, 173, pp.174-182.
|
12. |
Liu, W., et al., 2019, Bilge keel design for the traditional fishing boats of Indonesia's East Java. International Journal of Naval Architecture and Ocean Engineering, 11, pp.380-395.
|
13. |
Lee, K., Jeong, M.J. & Kim, D.H., 2019, Simulation modeling and performance verification of motion characteristics for USSV's SILS, Journal of Institute of Control, Robotics and Systems, 25(5), pp.388-397.
|
14. |
Moon, S.J., Park, C.I., Jeong, J.A., Kim, B.I. & Yun H.K., 2004. A sea-trial test of a pendulum-type mass driving anti-rolling system for small ships. Korean Society for Noise and Vibration Engineering(KSNVE), 2004.5, pp.438-441. |
15. |
Moon, S.J., Kim, B.I., Lee, S.H., Ham, S.Y., Jeong, J.A., & Lee, K.J., 2004. An experimental study on mass driving anti-rolling system for ships. Korean Society for Noise and Vibration Engineering(KSNVE), 2004.11, pp.727-730. |
16. |
Moon, S.J., Jeong, J.A., Yoon, H.K., Lee, G.J. & Ann, S.P., 2005. An experimental study on mass driving anti-rolling system for ships. The Society of Naval Architects of Korea, 42(6), pp.666-672.
|
17. |
Netural Point, Inc., 2011. TECH SPECS - V120:Trio. [Online] (Updated 2011) Avaliable at: https://optitrack.com/products/ v120-trio/specs.html [Accessed 18 July 2019]. |
18. |
Sharif, M., Roberts, G., & Sutton, R., 1996. Final experimental results of full scale fin/rudder roll stabilisation sea trials, Control Engineering Practice, 4(3), pp.377-384.
|
19. |
Shuzhe, C., Soon, H.G., Hong, E.Y, & Chitre, M.D. 2011. Modular modeling of autonomous underwater vehicle. OCEANS'11 MTS/IEEE KONA. |